DSTV ConstantiaIndependent Installer

Home › Blog › Packages and Prices

OpenView Decoder Price 2026: What You Pay Upfront

Packages and PricesBy our Constantia DStv teamUpdated 29 October 20268 min read

The OpenView decoder price is only the first line on your bill. At the time of writing, the current Wi-Fi model sells for R799 on the OpenView website, and shops sometimes run specials from around R599. Add a dish, cable and fitting, and the full upfront spend in Constantia usually lands well above the box price.

Quick answer

Budget R599 to R799 for the OpenView decoder price on its own at the time of writing. A decoder sold with an installation voucher sits around R1,699. On a big Constantia property with tall trees or a thatch roof, extra cable and a pole or wall mount can add to that. After installation, there's no monthly fee.

What the OpenView decoder price covers and what it leaves out

The box price buys the decoder itself. It doesn't buy the dish on your wall, the LNB that catches the signal, the coaxial cable from the roof to the lounge or the time it takes to aim it all properly.

That's why two neighbours in Bergvliet can tell you very different numbers. One already had a dish and paid only for the box. The other started from scratch and paid for a full OpenView installation.

Here's what makes up the full upfront amount:

  • The decoder: the Wi-Fi enabled OpenView box.
  • A dish: around 80 to 85cm is the size usually recommended.
  • An LNB and bracket: fixed to a wall, fascia or pole.
  • Cable and connectors: priced by length, so big erven cost more.
  • Labour: fitting, aligning on a signal meter, setting up and testing.

Three ways to pay upfront in Constantia

Most people end up on one of three routes. The right one depends on what's already on your roof and how tricky the site is.

RouteWhat you getUpfront cost (at the time of writing)Suits
Decoder onlyThe box, nothing elseFrom around R599 to R799Homes with a working dish already up
Decoder with installation voucherBox plus a dish and fittingAround R1,699Simple roofs with a clear view of the sky
Decoder plus a local installerBox, dish, cable run, mount and alignmentBox price plus a quote; standard dish work from around R850 to R1,400Large plots, tall trees, thatch and estates

If you've searched for an OpenView price 1600 deal, you've probably seen that voucher bundle. It's the openview decoder with installation price of around R1,699, rounded down in people's heads.

The voucher route is fine for a simple roof. It gets harder when the dish has to go 30 metres from the house or onto a pole to clear the trees.

Why a Constantia site can push the OpenView decoder price up

The box costs the same in Tokai as it does anywhere else. What changes is the work around it, and the valley throws up a few challenges.

Oaks, pines and the dish's view of the sky

OpenView comes from the same satellite position as DStv, at 68.5 degrees East. From here the dish looks north-east and fairly high, and a big oak or stone pine in that line blocks it completely.

Sometimes the fix is simply a different spot on the house. Other times it means a pole mount on the lawn. We cover this in more detail in our guide to aligning dishes around tall trees.

Long cable runs on big erven

A cottage or a lounge at the far end of a large property needs more cable, more clips and sometimes a trench or a sleeve under paving. That's real material and real time, so it shows up on the quote.

Thatch, slate and estate rules

We don't drill into thatch. On thatch and old slate roofs the dish goes on a wall, a gable or a pole instead. Estates in Constantia Hills and around Meadowridge may also want approval for where a dish is placed, so ask your HOA first.

Winter rain off the mountain

Heavy winter rain causes rain fade, a short loss of picture. A dish aimed with a bit of margin and sealed connectors rides it out far better, which is why we don't skip the weatherproofing.

Safety first

Wet slate, steep pitches and thatch are no place for a ladder. If your dish needs moving or aiming, let a technician with the right gear do it rather than climbing up yourself.

Using an old DStv dish to bring the cost down

Because both services use the same satellite position, a dish that's already up can often be reused for OpenView. That can cut the upfront spend to the decoder plus a short visit.

A technician still needs to check the LNB, the cable and the connectors. Older fittings that have sat through years of rain often have corroded ends, and a quick satellite dish alignment may be needed.

Technician tip

If you're keeping DStv on one TV and adding OpenView on another, tell us before we arrive. The LNB needs a free output for the second decoder, and it's quicker to plan that than to discover it on the day.

Need DStv installers in Constantia?

Tell us what you need or what your screen is showing. We give you a clear price before we drive out.

Paying for an OpenView setup, step by step

  1. Look outside and check whether you already have a dish, and roughly how old it is.
  2. Decide which route fits: decoder only, a voucher bundle, or a local installer.
  3. Ask for a quote that names the cable length, the mount and the alignment.
  4. Buy the decoder, comparing prices on the day as specials change weekly.
  5. Have the dish fitted and aimed on a signal meter, then test every channel.
  6. Activate online at openview.co.za, on WhatsApp or in the OpenView app using the decoder's details.

We give you the price before we drive out, so you know the full number before anything is bought.

What you stop paying once the OpenView decoder price is covered

This is where OpenView earns its place. There's no monthly fee and no contract, so after the upfront spend the running cost is basically electricity.

You get 20 or more TV channels, including e.tv, eMovies and StarLife, plus radio stations. For comparison, DStv's cheapest satellite package, Starter, costs R150 a month at the time of writing. Our OpenView and DStv comparison goes through the channels side by side.

Good to know

OpenView belongs to eMedia. It's not a DStv product, so it uses its own decoder and a DStv smartcard won't work in it.

Extra rooms, wall mounts and other add-ons

Each extra decoder needs its own box and its own cable from the LNB. In a big Kirstenhof or Wynberg family home, a second OpenView point for the kids' room is common and adds a little to the quote.

Many people also have the TV put on the wall at the same visit. Our TV wall mounting team can hide the cables while the satellite feed goes in, which saves a second call-out.

If you'd rather see the full labour side broken down, read our post on OpenView installer costs.

Get your Constantia quote before you buy

The quickest way to know your real number is to tell us what's on your roof and where the TV lives. Call or WhatsApp 072 237 6363 with a photo, or use our contact form for a quote.

Our team works across the valley and nearby suburbs, from Southfield to Plumstead. Find out more about our DStv installation in Constantia, and ask our team for a current quote before you pick a box off the shelf.

OpenView decoder price: FAQs

What is the OpenView decoder price in South Africa?

At the time of writing, the current Wi-Fi OpenView decoder costs R799 on the OpenView website, and retail specials start from around R599. Shop prices change from week to week, so compare on the day you buy. Remember the box price doesn't include a dish or installation.

What is the OpenView decoder price with installation?

A decoder sold with an installation voucher costs around R1,699 at the time of writing. That covers a standard dish and fitting. If your home needs a long cable run, a pole mount or a second room, a local installer will quote for the extra work.

Can I use OpenView without a dish?

No. OpenView is a satellite service, so the decoder needs a dish and LNB pointed at the satellite. If you already have a DStv dish, it can often be reused because both services use the same satellite position, after a technician checks the LNB and cable.

Is there a monthly fee after I buy an OpenView decoder?

No. OpenView has no subscription and no contract. Once the decoder is installed and activated, you watch the free channels without paying anything each month. Your only ongoing cost is the electricity the decoder and TV use.

How much does OpenView installation cost in Constantia?

It depends on the site. A simple roof with a clear view may be covered by the voucher bundle, while a large Constantia property with tall trees, thatch or a long cable run needs a quote. We budget standard dish work from around R850 to R1,400 and always quote first.

Talk to our Constantia team

Call or WhatsApp us for a quote. We answer quickly and we always price the job before we arrive.