Home › Blog › Installation and Costs
TV Brackets Explained: Fixed, Tilt or Full Motion?
TV brackets come in three main types: fixed, tilt and full motion. The right one depends on where you sit, how high the screen goes and what the wall is made of. Here's how each one works, in plain terms, from the team that mounts screens in homes across the Constantia Valley.
Quick answer
Pick a fixed bracket if the TV sits at eye level and you face it straight on. Choose a tilt bracket when the screen goes higher, like above a fireplace. Go for full motion TV brackets if you watch from different spots or need to turn away from window glare. The wall and the TV's weight matter as much as the type.
The three TV brackets in plain terms
Every bracket does the same basic job. A plate fixes to the wall, two arms or rails bolt to the back of the TV, and the two hook together. What changes is how much the screen can move once it's up.
If you'd rather skip the guesswork, our TV wall mounting service covers the bracket choice, the fitting and the cable tidy-up in one visit. Either way, it helps to know the options first.
Fixed brackets: flat and simple
A fixed bracket holds the TV flat against the wall, usually only a few centimetres off it. There are no moving parts, so there's very little to wear or work loose. It gives the neatest look and is normally the cheapest of the three.
The catch is access. With the screen tight to the wall, reaching the HDMI ports to plug in a decoder or a streaming stick can be fiddly. We often plan the cables and plugs before the TV goes up, so you never need to reach behind it.
Tilt brackets: angled down a little
A tilt bracket lets the top of the screen lean forward by a few degrees. That small angle points the picture down at your eyes when the TV hangs higher than ideal. It also cuts reflections from downlights and high windows.
Full motion brackets: arms that swing out
A full motion bracket sits on a folding arm. You can pull the TV away from the wall, turn it left or right and usually angle it up or down too. It's the most flexible option, and the most demanding on the wall.
Think of the arm as a lever. A heavy screen pulled all the way out puts a big load on the top fixings, so this type needs solid brick or proper timber backing behind board walls. A full motion bracket on a weak partition is a TV on the floor waiting to happen.
Fixed, tilt and full motion TV brackets side by side
| Type | Best for | Watch out for | Depth off the wall |
|---|---|---|---|
| Fixed | Eye-level TVs facing one couch | Ports are hard to reach | Slimmest |
| Tilt | Screens above a fireplace or tall cabinet | Little or no side-to-side movement | A bit deeper than fixed |
| Full motion | Open-plan rooms, corners, glare from glass doors | Needs a strong wall, costs more | Deepest, even when folded |
A quick word on names. Shops label the same thing a bracket, a TV wall mount or a TV mount holder. What matters is the type, the weight rating and the hole pattern on the back of your screen.
Which TV bracket suits which room in Constantia
Homes in Constantia tend to have big living areas, high ceilings and plenty of glass facing the garden. That changes the choice more than people expect. Here's how it usually plays out, room by room.
Putting the TV in a new room often means moving the decoder and dish cable too. Our DStv installation in Constantia team can extend the cable to the new spot while the bracket goes up.
The lounge with a fireplace
Winter rain off the mountain means many lounges here are built around a fireplace, and the TV often lands above it. That's high for comfortable viewing, so a tilt bracket is the minimum. Keep the screen clear of direct heat and follow the TV maker's guidance on clearance above a hearth.
Open-plan family rooms
In an open-plan space in Bergvliet or Meadowridge, the TV may need to face the couch at night and the kitchen during a Saturday match. A full motion arm handles both. It also lets you turn the screen away from afternoon sun pouring through big sliding doors.
Bedrooms and studies
Bedrooms are usually simpler. A fixed or tilt bracket at the right height from the bed is all most people need. In smaller homes in Kirstenhof or Tokai, a slim fixed mount keeps the room feeling open.
Covered patios and braai areas
Many larger properties have a covered entertainment area with a TV. Damp winter air and rain blown in under the roof are hard on metal, so we use rust-resistant fixings outside. Keep the screen well back from the edge of the cover and run power from a properly installed outdoor socket.
Need DStv installers in Constantia?
Tell us what you need or what your screen is showing. We give you a clear price before we drive out.
What your walls decide before you buy TV brackets
The wall matters more than the bracket. A quality bracket on a weak wall still fails. Before buying, find out what's behind the paint.
- Brick or block: the strongest base for any type, as long as the plugs and bolts suit the brick.
- Board partitions: common in newer extensions and estate homes. They need fixing into the studs or a solid backing, especially for a full motion arm.
- Stone and face brick feature walls: strong but uneven. Getting a level plate and clean holes takes patience and the right drill bits.
- Older thatched homes: walls are often thick and solid, but any new cable to the dish or aerial has to be routed with care through the roof space.
Estates around Constantia Hills sometimes have rules about drilling into shared walls or running cables outside. Check with the body corporate or HOA first, especially in a cluster home. It saves an awkward conversation later.
Just moved into a new home in the valley? Our DStv relocations and reconnections service gets the decoder working in the new lounge while we fit the bracket.
Questions to ask before buying TV brackets
- What does the TV weigh, and is the bracket rated comfortably above that?
- Does the bracket match the VESA hole pattern on the back of the TV? It's in the manual or on a sticker.
- Where will the decoder, soundbar and router sit, and how will cables reach them?
- Is there a plug point near the planned spot, or does an electrician need to add one?
- Will anyone need to angle the screen, or does it always face one couch?
- Is the wall brick, board or stone?
If a new decoder is part of the plan, think about the signal at the same time. An Explora installation needs a Smart LNB and a cable run to the TV point, so it makes sense to do both jobs together.
Smart TVs and the Explora Ultra stream over the internet, so the TV wall needs decent WiFi too. Our guide to connecting DStv to WiFi explains the simplest ways to get it there.
How we fit a TV wall mount
- We confirm the TV model, weight and hole pattern, then choose the bracket with you.
- We mark the height with you sitting where you normally watch.
- We check for pipes and wiring before drilling a single hole.
- We fix the wall plate with fixings that suit that wall, then check it's level.
- We fit the arms to the TV, hang it, lock it and test any tilt or swing.
- We route and tidy the cables, connect the decoder and check the picture with you.
Safety first
Drilling blind into a wall can hit a water pipe or live wiring, and a large TV needs two people to lift onto the bracket. Don't stand on chairs or work near plug points with wet hands. If you're unsure about the wall or the weight, leave it to a technician.
Bigger jobs, like a tasting room or restaurant on a wine farm with several screens, are a different scale. Our commercial DStv installation service plans the mounts, cabling and decoders as one project. If you're comparing companies first, our tips on picking an accredited installer are worth a read.
Book TV mounting in Constantia
The right TV brackets make a room feel finished, and the wrong ones leave you craning your neck every night. Tell us the TV size, the wall and the room, and we'll quote before we drive out. Send the details through our contact page or WhatsApp 072 237 6363.
TV brackets: FAQs
What is the difference between fixed and tilt TV brackets?
A fixed bracket holds the screen flat and close to the wall with no movement. A tilt bracket lets the top of the TV lean forward a few degrees, which helps when the screen sits above eye level or catches reflections. Tilt models sit slightly further off the wall.
Are full motion TV mounts safe?
Yes, when the arm is rated above the TV's weight and fixed into solid brick or proper timber backing. Problems start when a heavy screen on a long arm is bolted into board alone, or when the bolts are never checked. Have it fitted properly and check it is still tight after a few months.
How do you know what TV bracket you need?
Start with three things: the TV's weight, the VESA hole pattern on the back and the screen size range on the bracket box. Then decide how much movement you want and check what the wall is made of. If any of those are unclear, a technician can confirm them on site.
How high should a TV bracket be mounted?
For most lounges, the middle of the screen should sit roughly at eye level when you're seated. Higher placements, like above a fireplace, work better with a tilt bracket so the picture angles down. Sit on your couch and have someone hold a mark on the wall before drilling.
Do you install TV brackets in Constantia and nearby suburbs?
Yes. We fit fixed, tilt and full motion brackets in Constantia, Bergvliet, Tokai, Meadowridge and the surrounding southern suburbs. We check the wall, confirm the bracket suits your TV and quote before we drive out.
Talk to our Constantia team
Call or WhatsApp us for a quote. We answer quickly and we always price the job before we arrive.