DSTV ConstantiaIndependent Installer

Home › Blog › Multi-room Viewing

DStv Dual View Installation: What You Need First

Multi-room ViewingBy our Constantia DStv teamUpdated 20 October 20268 min read

A second TV that plays its own channel sounds simple, but a DStv dual view installation goes smoothly only when a few things are in place first. On a big Constantia property, the usual hold-ups are trees in front of the dish, a long route to the second room and estate paperwork. Here's what to sort out before you book.

Quick answer

Before a DStv dual view installation, you need two decoders DStv allows to be linked, a dish with a clear view north-east (ideally 80cm with a Smart LNB), a cable route to each TV, and one account with one package. In an estate, get approval for the work and the dish position too.

The short list at a glance

This table sums up what we check before we quote. The last column is where homes in the valley tend to trip up.

What you needWhy it mattersThe Constantia catch
Two linkable decodersOnly certain pairs can joinOld boxes left in a cupboard may not qualify
A clear view of the skyWeak signal breaks the linkOaks and pines grow into the dish's path
Smart LNB on the dishFeeds tuners in both decodersOlder dishes often still have a single LNB
A cable route to each TVEach box needs its own feedBig erven mean long runs
Estate approvalRules on dishes and contractorsGate access must be arranged ahead
One account, one packageLinked boxes share the subscriptionBoth TVs get the same channels

If you're new to the idea, our explainer on one subscription on two TVs covers the basics. The rest of this article goes through each item.

Decoders that can be linked for a DStv dual view installation

DStv only links certain combinations. Two decoders can be a mix of the Explora, the HD decoder and some older PVR models. For three decoders, the primary must be an Explora.

Check the model on the sticker under each box before you buy anything. DStv keeps a full list of allowed XtraView combinations and costs, which we use when we quote.

Think about which decoder will be the primary, too. The secondary only works while the primary is on and sending its link signal. An Explora usually makes the best primary, and our Explora price and setup guide helps if you're adding one.

A dish that sees past the trees

DStv recommends a Smart LNB on an 80cm dish for most XtraView setups. The dish must point north-east and fairly high, and in Constantia that line of sight is often blocked by old oaks, stone pines or a neighbour's new double storey.

A dish that was fine for one decoder can struggle once it feeds two. Every winter front off the mountain cuts the signal a little, and a dish with no margin drops out first. We check the reading on a meter, and sometimes moving the dish a few metres is the real fix. Our article on dish alignment around trees shows what we look for.

Technician tip

Stand where the dish is and look north-east in summer, when the trees are in full leaf. If branches fill that view, budget for trimming or a new dish spot before the second decoder goes in.

Planning the cable route on a big property

Each decoder needs its own cable from the Smart LNB. On a large erf, the second TV might be in a pool room, a garden cottage or a study at the far end of the house. Long runs lose signal, so the route matters as much as the length.

Homes in Bergvliet and Meadowridge sit on smaller plots, but the second TV is often in a back bedroom or a granny flat. There, the challenge is getting cable through a finished ceiling without leaving marks.

Roofs here add their own rules. Thatch shouldn't be pierced for cable, so we route along fascias, walls or underground in conduit. Slate cracks easily underfoot, so we plan the dish and cable to keep roof walking to a minimum.

  • Mark where each TV will go, and whether it's on a wall or a cabinet
  • Note any outbuilding and the rough distance from the house
  • Check for an existing conduit or cable path we can reuse
  • Have a plug point ready at each TV spot

If a TV still needs to go up on a wall, book our TV mounting in Constantia for the same visit so the cable hides behind it.

Need DStv installers in Constantia?

Tell us what you need or what your screen is showing. We give you a clear price before we drive out.

Estate rules to clear before a dual view DStv installation

Many estates in Constantia, Tokai and Constantia Hills control where a dish can go and when contractors may work. Some want the dish out of sight from the road, and most need our names and vehicle details for the gate.

Ask the managing agent or HOA before you book. A dish move that breaks the rules means a second visit, and nobody wants to pay for that. If your complex runs a shared dish, the job is different again, and our communal DStv systems team checks how the building is wired before anything else.

Safety first

Please don't climb onto a thatch or slate roof to check the dish yourself. Both are slippery and easy to damage, and a fall from that height is serious. Leave roof work to a technician with the right ladders.

Account rules for XtraView

XtraView links two or three decoders on one subscription. Both boxes carry the same package, so you can't run Premium in the lounge and a smaller package in the cottage. At the time of writing, two linked decoders cost your package plus one Access Fee of R125 a month.

If one decoder is already a PVR like the Explora, you're already paying that fee, so the second box adds nothing monthly. DStv also needs you to contact them to link the decoders on your account, so have the account holder's details handy.

One more thing many people miss: each Explora needs its own internet link for apps and catch-up. If the second box is far from the router, our WiFi and network installation can get a signal to it.

Can you connect XtraView yourself?

If you've searched how to connect extraview, you'll know the guides make it look easy. The decoder side is mostly the installation wizard. The hard part is the dish, the LNB and the cable runs, which need a ladder and a signal meter.

You may also come across dstv extraview frequency settings on forums. On a private dish with a Smart LNB, there are no numbers to enter, because the wizard finds the satellite itself. Typing in values from the internet is a quick way to lose the picture on both TVs.

DStv recommends an accredited installer for XtraView, and our team is accredited and works to MultiChoice installation standards. Our tips on picking an accredited installer explain what to ask any technician.

Your checklist before the DStv dual view installation day

Tick these off and we can usually finish in one visit.

  • Both decoders, remotes and smartcards in the house
  • Model numbers checked against DStv's linking list
  • A decision on which box is the primary
  • TV spots chosen, with power at each one
  • Estate approval and gate access arranged
  • Account holder's details ready for the linking call

Ready to add a second TV in Constantia?

We quote before we drive out and test both TVs with you before we leave. Have a look at our XtraView setup in Constantia, or see everything we offer for DStv installation in Constantia and the southern suburbs.

When you're ready, contact our team with your decoder models, and ask for a current quote.

DStv dual view installation: FAQs

What do I need for a DStv dual view installation?

You need two decoders that DStv allows to be linked, a dish with a Smart LNB, and a separate cable to each decoder. Both boxes go on one account with one package. A clear view of the sky to the north-east is just as important.

Can I use my old dish for a dual view DStv installation?

Often, yes, if it's in good condition and has a clear view of the satellite. Most older dishes need their LNB swapped for a Smart LNB, which feeds both decoders. We test the signal first and tell you before changing anything.

How much does XtraView cost per month in Constantia?

At the time of writing, two linked decoders cost your normal package plus one Access Fee of R125 a month. If one decoder is an Explora, you already pay that fee, so the second adds nothing. Prices can change, so confirm on dstv.com.

How do I connect extra view on a DStv HD decoder?

The HD decoder needs its own cable from a Smart LNB, then it runs the installation wizard like any new box. After that, DStv links it to your other decoder on your account. The HD decoder can be the primary or the secondary in a two-box setup.

Do I need an accredited installer for XtraView?

DStv recommends an accredited installer for XtraView, because the dish, LNB and cabling must be right for the link to work. Ask any installer about their accreditation, and get a quote before they drive out to you.

Talk to our Constantia team

Call or WhatsApp us for a quote. We answer quickly and we always price the job before we arrive.